Single Channel Cable Ramps

Single channel cable ramps are perfect for rerouting cables in public and commercial areas of high traffic. The cable ramps have two designs to choose from. The drop over model allows for quick setup by placing the ramp over the cable that needs to be protected. The open top model allows for placement of the cable in the channels for maximum protection from the top and bottom. The cable protectors are available in orange and black colors. Alternate the orange and black sections for higher visibility! The single channel cable ramps are modular for multiple different applications. On one end of the ramp features male "T" connectors and the other end features female "T" connectors allowing the sections to be connected. The cable ramps feature a patented 5 bar tread pattern and safety warnings molded into the surface for traction and safety. Custom company logos can be molded into the ramp surface ( call for details ). Note: Drop over protectors do not prevent cable wear from below!

Single Channel Cable Ramp Features

• All weather polyurethane construction
• Protects cables and hoses up to 1.25 inches in diameter
• 23,400lb/axle load capacities
• Lightweight
• Easy setup and assembly
• Safety warnings and treads molded into surface
• Connect alternate colors for greater visibility
• "T" shaped connectors interlock modular sections
• Recessed carrying handle molded underneath each section
• Custom company logos can be molded into the surface

Specification Data		Load Capacity Per Tire / Axle		Warnings
Material	Polyurethane (UV stabilized)	1 Channel	Max Load at 70°F (21°C)	Safety warning symbols molded into surface.
Operating Temp	-40°F to 120°F (-40°C to 48°C)	Per Tire	11,700 lbs. ( 5,307 kg )
Safety Symbols	Per ANSI. Z535.3-1991	Per Axle	23,400 lbs. ( 10,614 kg )