These lightweight aluminum heavy duty commercial grade Bobcat/skid loader ramps are the perfect solution for loading automobiles, bobcats, skid loaders, ditch witches, trenchers and tractors with weight capacities up to 12,000 lbs. Commercial ramps with an "s" on the end of the part number include a durable stub foot toe that allow loading at a variety of load heights. Ramps are designed for a 36-42 inch load height. All ramps come standard with 20,000 lb. capacity ramp ends to allow safe worry free loading. We offer a 90 degree hook end or pin on ends to secure the ramp on the vehicle. The "02" pin on ends require skid seat ramp attaching brackets sold separately. Also available are ramp wall brackets for loading skid steers and Bobcats into basements!
Click the pictures below to enlarge
- Heavy duty extruded 90 degree hook ends (hooks onto a 1-5/16" bar or angle channel)
- Recommended for pneumatic wheeled or rubber track vehicles only
- Extra wide serrated cross bars offer maximum traction in the rain, mud or snow. Stronger than the traditional "rung type" design.
- Constructed of lightweight aircraft grade aluminum for superior durability and strength
- Lightweight 2 beam design
- Aluminum ramps will never rust like steel ramps
- Genuine Canaramp Technology
- Reinforced Stub Foot Design prevents curling of the bottom of the ramp
- Made in the USA
- 1 Year Manufacturer Warranty
- Optional ramp wall brackets available for driving Bobcats and skid steers into basements
Commercial Bobcat / Equipment Ramps
Highest quality Ramps on the market Guaranteed! Most ramps ship same or next business day!!
| Item # |
Length |
Width |
Thick |
Capacity
(per axle) |
Load Height |
Ramp Attaching Style |
Weight
(each) |
Price (pair) |
| 10-14-090-02-S |
7.5' |
14" |
4.25" |
10,000 lbs |
24"-36" |
Pin on end |
47 lbs. |
+70 s&h
|
| 10-14-090-05-S |
7.5' |
14" |
4.25" |
10,000 lbs. |
24"-36" |
Hook end |
47 lbs. |
+70 s&h
|
| 10 FOOT RAMPS |
| 10-16-120-05-S |
10' |
16" |
4.25" |
10,000 lbs. |
36"-42" |
Hook end |
73 lbs. |
+ freight |
| 10-16-120-02-S |
10' |
16" |
4.25" |
10,000 lbs. |
36"-42" |
Pin on end |
73 lbs. |
+ freight |
| 12 FOOT RAMPS |
| 12-16-144-05-S |
12' |
16" |
6.25" |
12,000 lbs |
36"-42" |
Hook end |
102 lbs. |
+ freight |
| 12-16-144-02-S |
12' |
16" |
6.25" |
12,000 lbs |
36"-42" |
Pin on end |
102 lbs. |
+ freight |
| 14 FOOT RAMPS |
| 10-16-168-05-S |
14' |
16" |
6.25" |
10,000 lbs |
48"-52" |
Hook end |
125 lbs. |
+ freight |
| 12-16-168-05 |
14' |
16" |
6.25" |
12,000 lbs |
36"-42" |
Hook end |
115 lbs. |
+ freight |
| 12-16-168-02 |
14' |
16" |
6.25" |
12,000 lbs |
36"-42" |
Pin on end |
116 lbs. |
+ freight |
| Click here to view Ramp Skid Seat Attaching brackets. Required for the "02" pin on ramp style. Available in steel or aluminum. Weld or bolt onto truck, trailer or dock. Call for pricing and available sizes. All ramps are available with hook end, pin-on (loop) end or flat plate style by special order. All ramps with the 06 plate end include safety straps. |
Skid Seat Ramp Attaching Brackets
Skid seat brackets must be used with all pin end ramp systems to secure them to your loading dock, step deck trailer or flat bed. Ramp tubes sit down in skid seat channel and pinned eliminating the risk of ramp slipping off trailer or dock. Consider brackets wider than your ramps so you can slide the ramps in or out to accommodate different vehicles.
WARNING! Aluminum brackets must be bolted or welded to your trailer or loading dock before using ramps.
Steel brackets must be welded at the top and bottoms of brackets.
| Item # |
Description |
Length |
Width (inches) |
Pictures
(click to enlarge) |
Price (each) |
| Skid seat-A97 (each) |
(1) 97 " aluminum ramp attaching bracket
(recommended for rear of step deck and upper deck) |
97" long ea |
4" wide |
Click to view picture |
+ freight |
| Skid seat-A96 (each) |
(1) 96" aluminum ramp attaching bracket
(recommended for rear of step deck and upper deck) |
96" long ea |
4" wide |
Click to view picture |
+ freight |
| Skid seat-A48 (each) |
(1) 48" aluminum ramp attaching bracket
(recommend a pair for rear of step deck and upper deck) |
48" long ea |
4" wide |
Click to view picture |
+ freight |
| Skid seat-A36 (each) |
(1) 36" aluminum ramp attaching brackets |
36" long ea |
4" wide |
Click to view picture |
+ freight |
| Skid seat-A24 (each) |
(1) 24" aluminum ramp attaching brackets
(recommend a pair for front of step deck) |
24" long ea |
4" wide |
Click to view picture |
+ freight |
| Skid Seat-S36 (each) |
(1) 36" steel ramp attaching brackets |
36" long ea |
2" wide |
Click to view picture |
+ freight |
| Skid Seat-S24 (each) |
(1) 24" steel ramp attaching brackets |
24" long ea |
2" wide |
Click to view picture |
+ freight |
Heavy Duty Strap Packages
| Item # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
Click here for shorter heavy duty equipment ramps. Call for a quote for custom applications.
Call for a quote on custom ramp applications. We can manufacture any size or weight capacity custom ramp you require!
    |
