The scale ramp from Race Ramps makes rolling your car on and off of a racing scale pad easy. These scale ramps are constructed of a polystyrene material that is light weight and durable. This allows the car ramps to have a weight capacity of 1,500 lbs per ramp yet weigh 5 lbs or under, depending on model. The ramps have a non-slip textured surface to keep the tires from slipping when rolling on or off of the scales. The polystyrene material used to construct the ramps will not scratch or dent the surface of your floor or vehicle. Scale ramps are designed to be used with racing scales that are 15" wide and 2.5" high. These scale ramps from race ramps are made in the USA and come with a 1 year manufacturer warranty.
If this is not the car ramp you are looking for, then check out our complete line of car ramps
Click the pictures below to enlarge
- Slip resistant textured surface
- Will not scratch or dent floor or vehicle
- Polystyrene material is light weight & durable
- Fits most 15" racing scales that are 2.5" high
- 1 Year Manufacturer Warranty
- Made in U.S.A.
Scale Ramps Specs & Pricing
| Model # |
Description |
Dimensions |
Ramp Loading Angle |
Weight |
Weight Capacity |
Picture |
Price |
| RR-SCALE |
(4) Scale Ramps for scales 2.5" high |
14" long x 12" wide x 2.5" tall |
7.8 degrees |
2.5 lbs each |
3,000 lbs per pair |
Click to Enlarge |
+21 s&h
|
| RR-SCALE-2 |
(2) Scale Ramps for scales 2.5" high |
30.1" long x 12" wide x 2.5" tall |
7.8 degrees |
5 lbs each |
3,000 lbs per pair |
Click to Enlarge |
+21 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
Heavy Duty, Commercial, & Automotive Accessories
| Model # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
|
Items: ( ) | Total: 
