10,000 lb. Aluminum Trailer Ramps

These commercial trailer ramps are the lightest aluminum ramps on the market that are rated at the 10,000 lb. max axle weight capacity. The 10,000 lbs per axle weight rating means that these ramps can be used to load cars, pick-up trucks, Hummers or commercial trucks up to class 6. They work for most trailers up to 40" high including: step deck trailers, flat bed trailers, loading docks, vans or other trailers that can accommodate a skid seat ramp attaching bracket. This trailer heavy duty ramp system breaks down into multiple sections each weighing 59 lbs. each allowing it to be set up easily in a matter of minutes. Make sure to purchase our optional ramp storage hangers to store the complete system underneath the deck of your trailer. The ramp ends pin to a center support stand that is adjustable to multiple heights and the skid seat ramp bracket on the trailer or loading dock. Take note that the adjustable support stands used at the center on each side of this ramp kit can change the loading angle onto step deck trailers, loading docks and flat bed trailers by creating an offset angle or an arch. Skid seat brackets are REQUIRED for this system and the brackets are available in steel or aluminum. Each skid seat bracket must be welded or bolted to the trailer or loading dock for safety & versatility. The wider the skid seat bracket that you purchase the more you're able to change the width of the ramps to accommodate different vehicles or equipment. It is proven that this step deck system will pay for itself by freeing up additional space on your drop deck trailer allowing room to haul an extra vehicle or more freight cargo.

*Notice*: Our high quality step deck ramps have been designed by an Engineer with 30 years experience in the loading industry and are the lightest, strongest ramps on the market. Beware of cheap imitation stepdeck trailer ramp systems being sold using a knife cut (smooth taper) at the bottom of the ramp to save manufacturing costs, they are bending the toe at bottom of the ramps causing them to break. Our well designed heavy duty ramps have a reinforced pinned toe at the bottom of the ramp so they may be used as a 16 foot long modular system with adjustable support stands, upper step deck trailer ramps using the 8 foot ramps by themselves or used as 8 foot ramp on the rear of the trailer without bending the bottom of the ramp.

Lockable Ramp Hangers & Support Stand Hangers allow the entire ramp system to be stored along the frame of the trailer. We offer a single ramp hanger designed for low clearance trailers or a double hanger that will allow you to store 2 ramps in one hanger. The stand hangers also come in 2 different models. We offer a rear stand hanger for mounting the support stands behind the rear tandem axle (53' trailers). The front stand hanger will mount the stands in front of the rear axle.

Rated at 10,000 lbs. per axle. How Do I Determine Axle Capacity?
The best way to determine your vehicles axle weight is to drive the heaviest axle of the vehicle on a scale. Normally the front end of the truck is the heaviest axle weight because of the engine. Not recommended for trucks with mounted cranes, forklifts, steel track vehicles.
Warning! NEVER EXCEED THE MAXIMUM AXLE CAPACITY OF THIS RAMP SYSTEM

Click on pictures to view Step Deck Ramps

Commercial Trailer Ramp Features:

• Constructed of lightweight aluminum for durability and strength
• Will never rust like steel ramps
• New Reinforced double pin stubbed toe at the bottom of the ramp to eliminate ramp curling up at different load heights (up to 40" high max)
• Versatile and fully adjustable ramp system sets up in minutes
• Extra wide plate style serrated cross bars offer maximum traction in the rain, mud or snow
• Load vehicles from the front, back or top step deck with one ramp system
• No component heavier than 59 lbs.
• Ramps are rated at 10,000 lbs. per axle (see maximum vehicle capacities below)
• Strongest, lightest ramps on the market!
• Ramp hanger storage brackets available
• Support Stand Brackets available
• 1 Year Manufacturer Warranty

Heavy Duty Strap Packages

Model #	Description	Detailed Information	Price
4in-Rat-Flat Hook	4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit Weighs: 14lbs.	click to enlarge	+10 s&h
4in Rat-J-Hook	4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs.	click to enlarge	+10 s&h
18RAT-J-2	2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair)	click picture to enlarge	+8 s&h
18RAT-S-2	2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair)		+8 s&h
LOAD-BINDER	Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2"	click picture to enlarge	+12 s&h