Free-up space in your vehicle and put your excess cargo into the excess cargo carrier by Lets Go Aero. The GearDeck™ 17 hitch cargo carrier boxes have an outstanding 17 cubic feet of storage space. Featuring a waterproof lid enclosure, this excess cargo carrier can carry luggage, recreational gear, tools and equipment, and even generators. With many features and so much adjustability these cargo carrier boxes are the perfect solution to your excess cargo problem. The GearDeck™ 17 comes with Lets Go Aero's TwinTube™ telescoping frame design for easy access of 20" to SUV's and pick-up truck beds.
Open either side of the hitch cargo carrier boxes and secure your cargo to the 4 D-Rings mounted on the bottom of the floor. This Lets Go Aero cargo carrier is designed for 2" hitch receivers, and requires minimum Class II tow rating. This cargo carrier disassembles in 3 pieces for an easy instillation. The inside(usable) dimensions of the GearDeck™ 17 is 46 1/2"L x 24"W x 25" and a total carrying capacity of 300 pounds. The low cost, excess cargo carrier allows for a license plate location and dual reflectors for safety. Three different sizes of cargo nets are available to secure all your loads (sold separately-see below) Need a hitch for a cargo carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
Click the pictures of the auto cargo carrier below to enlarge

- Telescopes back 20" for access to SUVs and pick-ups
- Tray & lid is consisted of High density polyethylene
- 300 lb carrying capacity
- Useable inside size 46 1/2"L x 24"W x 25"H
- Outside size 48"L x 27"W x 27"H
- Water resistant enclosure can handle nearly any weather condition
- Requires Class III or IV trailer hitch (2" square hole)
- Fully enclosed with 4 D-Rings for attaching excess cargo
- Can be used on a class II trailer hitch with the optional 1-1-4" to 2" hitch adaptor which you can see here
- Weighs only 75 lbs.
Excess Cargo Carrier Specs & Pricing
| Model # |
Description |
Size |
Weight Capacity |
Price Free Shipping Included |
| GD-4117-BB |
Black Lid & Black Tray Excess Cargo Carrier - Lets Go Aero |
Useable size: 46 1/2"L x 24"W x 25"H |
300 lb capacity - weighs 75 lbs.(17 cu. ft.) |
On Back Order Till Summer 2010
|
| GD-4117-WB |
White Lid & Black Tray Excess Cargo Carrier - Lets Go Aero |
Useable size: 46 1/2"L x 24"W x 25"H |
300 lb capacity - weighs 75 lbs.(17 cu. ft.) |
On Back Order Till Summer 2010 |

Discount prices on cargo nets, coupler locks, and hitch pins to complete your travel needs
Hitch Mounted Cargo Carrier Accessories
| Item |
Description |
Price |
SHP-2050
 Click to enlarge |
Silent Hitch Pin: For Class I & II hitches - Keeps tow accessories secure and rattle free. Standard lock - Chrome coating - Rubber dust cap on lock |
+free shipping
|
SHP-2030
 Click to enlarge |
Silent Hitch Pin: For Class III & IV hitches - Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock |
+free shipping
|
ANTI-TILT
 |
Anti-Tilt Locking Device - for class III or larger trailer hitches. Pinches main tube of tow accessory tight into trailer hitch to eliminate rocking Will not work on hitches with large chain loops! |
+free shipping
|
A20402
 Click to enlarge |
Standard Hitch Pin - for 2" class III and IV receivers - 5/8" x 4-3/4" |
+ free shipping
|
HP31
 Click to enlarge |
Locking Hitch Pin - for 2" class III and IV receivers - 5/8" x 2-3/4" |
+ free shipping
|
HP32
 Click to enlarge |
Locking Hitch Pin - for 1 1/4" class I and II receivers - 1/2" x 2-3/4" |
+ free shipping
|
DRH-1
 Click to enlarge |
Dual Hitch Extension - Dual Extension Tube for 2" Receivers This hitch extension converts the 2 " receiver tube (class III and IV) to a hitch with two 2" diameter holes (class III and IV) for towing with the bottom tube and to use a hitch accessory, such as a cargo carrier or bike rack, on the top tube. Constructed of durable steel with a black powder-coated finish and has a weight capacity of 4000 lbs. |
+ 15 s&h
|
D-185
 Click to enlarge |
Receiver Hitch Adapter/Extender - 6" SOLID Extension Tube for 1¼" Receivers Constructed of durable steel with a black powder-coated finish, this hitch extension converts the receiver tube sizes from 1¼" (class I and II) to a 2" diameter hole (class III and IV) and extends to 6" with a 350 lbs. *Not for Towing* |
free shipping
|
D-191
 Click to enlarge |
Receiver Hitch Adapter/Extender - 8" SOLID Extension Tube for 2" Receivers Constructed of durable steel with a black powder-coated finish, this hitch extension converts the receiver tube sizes from 2" (class III and IV) to a 2" diameter hole (class III and IV) and extends to 8" with a 3500 lb. Capacity |
free shipping
|
CN1515
 Click to enlarge |
Small Cargo Net - 15" x 15" Cord diameter: 4.55 mm Number of hooks: 6 |
+ 4.50 s&h
|
CN3045
 Click to enlarge |
Medium Cargo Net - 30" x 45"
Cord diameter: 6 mm Number of hooks: 14 |
+ 6.50 s&h
|
CN7296
 Click to enlarge |
Large Cargo Net - 72" x 96" Cord diameter: 4.5 mm Number of hooks: 32 |
+ 8 s&h
|
VH-Strap
 Click to enlarge |
1 inch wide cargo tie down strap kit (2 cam straps- 2 ratchet straps) |
+8 s&h
|
 |
Find a trailer hitch for your vehicle with the Hitch Selector! |

|