Fire engine wheel chocks were specifically designed for use with fire equipment and comply with NFPA 1901-1904 and meet SAE-J348 standards. These chocks are constructed of a high quality urethane which will resist corrosion from oils, fuels, and solvents. The fire engine wheel chocks are available in two sizes. The 2512 series chock will work with wheel diameters up to 33" and the 2514 series chock will work with wheel diameters up to 44". Each wheel chock features a carrying handle molded into the chock and a non slip traction pad on the bottom. The traction pad is available as a aluminum cleat for traction on ice or rubber pads. The chocks are available in red or yellow for easy identification. All fire engine wheel chocks are SOLD AS SINGLES.
Click pictures below to enlarge
- Heavy duty urethane construction
- Molded carrying handle for easy handling
- Complies with NFPA 1901-1904
- Meets SAE-J348 Standard
- Available with aluminum cleats for traction on ice or rubber grip pads
- Safety yellow color or red
- Resistant to oils, fuels, and solvents
- VEIW ACCESSORIES
|
- Improper use may result in product failure
- Select wheel chock according to vehicle type and size
- Always use in pairs and on firm surfaces
- Chock in direction of grade
- Chock both sides of wheel if direction of grade is undetermined
- Use only after parking brake is applied and tested
- Center chocks snugly and squarely against tread of each wheel
- Always test chocks to insure they meet requirements
- Do not drive over wheel chocks
|
2512 Series Fire Engine Wheel Chock Specifications & Pricing
| Item # |
Description |
Length |
Width |
Height |
Weight |
Price |
| AT2512AC-Y |
Wheel Chock with Aluminum Cleat
Color: Yellow |
15.5 in.
(394 mm) |
8.5 in.
(216 mm) |
8.25 in.
(210 mm) |
9 lbs.
(4.1 kg) |
+10 s&h
|
| AT2512AC-R |
Wheel Chock with Aluminum Cleat
Color: Red |
15.5 in.
(394 mm) |
8.5 in.
(216 mm) |
8.25 in.
(210 mm) |
9 lbs.
(4.1 kg) |
+10 s&h
|
| Item # |
Description |
Weight |
Price |
| AT2512VM |
Vertical Mounting Bracket for Model 2514 Chock
Zinc Plated Finish
Mounting Hardware Not Included. |
4 lbs.
(1.8 kg) |
+5 s&h
|
| AT2512HM |
Horizontal Mounting Bracket for Model 2512 Chock
Zinc Plated Finish
Horizontal bracket may be mounted under the vehicle or in an apparatus compartment
Mounting Hardware IS Included. |
4.25 lbs.
(1.9 kg) |
+5 s&h
|
| Note: These wheel chocks comply with NFPA 1901-1904 and meet SAE-J348 Standard for up to 32 in. (810 mm) wheel diameter. |
2514 Series Fire Engine Wheel Chock Specifications & Pricing
| Item # |
Description |
Length |
Width |
Height |
Weight |
Price |
| AT2514AC-Y |
Wheel Chock with Aluminum Cleat
Color: Yellow |
21 in.
(533 mm) |
11.25 in.
(286 mm) |
12.25 in.
(311 mm) |
22 lbs.
(10 kg) |
+18 s&h
|
| AT2514AC-R |
Wheel Chock with Aluminum Cleat
Color: Red |
21 in.
(533 mm) |
11.25 in.
(286 mm) |
12.25 in.
(311 mm) |
22 lbs.
(10 kg) |
+18 s&h
|
| AT2514RP-Y |
Wheel Chock with Rubber Pad
Color: Yellow |
21 in.
(533 mm) |
11.25 in.
(286 mm) |
12.25 in.
(311 mm) |
23 lbs.
(10.4 kg) |
+18 s&h
|
| AT2514RP-R |
Wheel Chock with Rubber Pad
Color: Red |
21 in.
(533 mm) |
11.25 in.
(286 mm) |
12.25 in.
(311 mm) |
23 lbs.
(10.4 kg) |
+18 s&h
|
| Item # |
Description |
Weight |
Price |
| AT2514VM |
Vertical Mounting Bracket for Model 2514 Chock
Zinc Plated Finish
Mounting Hardware Not Included. |
4.75 lbs. (2.2 kg) |
+6 s&h
|
| AT2514HM |
Horizontal Mounting Bracket for Model 2514 Chock
Horizontal bracket should be mounted in an apparatus compartment and not under the vehicle
Zinc Plated Finish
Mounting Hardware IS Included. |
5 lbs.(2.3 kg) |
+6 s&h
|
| Note: These wheel chocks comply with NFPA 1901-1904 and meet SAE-J348 Standard for up to 44 in. (1120 mm) wheel diameter. |
Heavy Duty, Commercial, & Automotive Accessories
| Model # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
|
Items: ( ) | Total: 
