Tilt-a-Rack mobility scooter carrier.

The new Lightweight Aluminum Tilt-a-Rack^® Scooter Carrier is easy to install and use. There are no electronic components that might fail and it operates by a natural force, gravity! Gravity and balance work for you!

The tilt feature eliminates the need for ramps. Just pull out the deck extension ramp, remove a safety clip and pull the tilt handle and the rack tilts toward the passenger side. It conveniently reaches the curb for parallel parking. The deck extender pulls out from beneath the scooter, reducing the angle of incline. This feature is especially helpful when a handicap curb is not available. The solid deck carrier surface will protect the underside of the scooter or power wheelchair from the outdoor elements. The pinch bolt eliminates the minute movement of the hitch bar when inside the hitch receiver. There are many optional accessories available to customize you Tilt-a-Rack carrier. Click here to see them all.
Need a hitch for a mobility carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!

Features:

• Aluminum lightweight construction
• Solid deck surface will protect your chair or scooter from the outdoor elements
• New user friendly design
• No disassembly of chair or scooter needed
• Fits vehicles with a 2" receiver
• Extension Deck Ramp pulls out from under the carrier
• Aluminum construction will never rust in the outdoor elements
• Tilts up vertically when not in use
• Deck extends and tilts for easy loading
• 3 platform sizes to choose from
• 12" of maneuverable area from receiver to edge of rack
• 2 Optional retractable tie down straps can be purchased to secure your scooter (Part # CB)
• Quality tie down straps are required and sold separately
• 2 Optional retractable tie down straps can be purchased to secure your scooter (Part # Retractable-Strap )
• View Instructions (PDF)

Wheelchair carrier limitations:

• Carrier Carrying Capacity: Never exceed the maximum rated weight capacity of the wheelchair carrier
• Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs
• Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
• Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
• Please check with your dealer to find out if your vehicle's carrying capacity
• NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailer

The Tilt-a-Rack^® Scooter Carrier's - 3 easy steps to independence:
1. - Tilt the rack
2. - Load the Scooter
3. - Secure and go!

Click the pictures of the New Model below to enlarge *Available in Now!*

Find a trailer hitch for your vehicle with the Hitch Selector!

**NEVER exceed your vehicles carrying capacity or trailer hitch capacity. Most Class II hitches are typically rated at 350 lbs, Class III hitches are 500 lbs (Please refer to capacity sticker on the trailer hitch). Some vehicles may require air shocks or other modifications to the vehicles suspension. Please check your owners manual for vehicle hauling capabilities.

Tilt-a-Rack mobility scooter carrier accessories

Part	Description	Picture	Price
VH-MSTRAP	Heavy duty tie down strap kit. Includes: 2 heavy duty 1" wide x 6' foot long ratchet straps. 2 heavy duty 1" wide x 6' long cam buckle straps. 1200 lb. capacity in black.	Click to enlarge	(FREE Shipping)
350RVMC-MINI	350RV-MINI heavy duty mobility scooter cover	Click to enlarge	(FREE Shipping)
350RVDC-MINI	350RV-MINI model deck cover	Click to enlarge	(FREE Shipping)
350RVDC	350RV model deck cover	Click to enlarge	(FREE Shipping)
500RVMC	350ARV and 500ARV heavy duty mobility scooter cover	Click to enlarge	(FREE Shipping)
500RVDC	500RV model deck cover	Click to enlarge	(FREE Shipping)
Retractable-Strap	(1) Retractable Ratcheting Strap with S-Hook Ends (each) - 6' Long x 1 7/8" wide- 3,000 lbs break Strength	Click to enlarge	+6 s&h
08HA3	Class III, IV 2" to 2" hitch riser or drop hitch adaptor. Raises or lowers the carrier 4 inches. Solid main tube construction.	click to enlarge	(FREE Shipping)
08HA2	Class II-1-1/4" to 2" hitch riser or drop hitch adaptor. Raises or lowers the carrier 4 inches. Solid main tube construction.	click to enlarge	On Back Order
BOGIE	Bogie Wheel Kit- attaches to the front of the rack, allowing a single person to maneuver the entire rack with ease. When you're ready to go, the Bogie Wheel detaches quickly and easily.	Click to enlarge	(FREE Shipping)
SHP-2030	Silent Hitch Pin: For Class III & IV hitches - Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock	Click to enlarge	(FREE Shipping)
ANTI-TILT	Anti-Tilt Locking Device - for class III or larger trailer hitches. Pinches main tube of tow accessory tight into trailer hitch to eliminate rocking Will not work on hitches with large chain loops!	Click to enlarge	(FREE Shipping)

*Always follow the scooter carrier manufacturers loading guidelines. Discount Ramps .Com LLC assumes no liability whatsoever for damage or injury incurred during the use of this product.*