 The AF-9034-HD is a motorcycle bike ramp system that is fully constructed out of aluminum materials. The aluminum design of this bike ramp makes it very easy to handle and store when you're loading or hauling your motorcycle. Not only are these ramps super light weight but they are also folding. These motorcycle ramps have a hinge system in the middle and fold at the hinge so that they can typically be stored next to your bike during transportation. Similar in style to our Black Widow Motorcycle Ramps, the AF-9034-HD can be assembled in two different ways. One method is to use the bolts provided to assemble the bike ramps individually so that you have 3 single ramp sections. This method is particularly easy when you want to have the ramps as compact as possible for storing. The second method is to bolt all the motorcycle bike ramps together to form one large 89" long x 34" wide folding unit. If you choose to bolt them all together it will definitely decrease the setup time taken when you go to load or unload your bike. However, in some situations you might need an extra hand to setup the bike ramp due to the weight being 56.5lbs when everything is bolted together. Keep in mind that these motorcycle bike ramps are 89" long which is usually enough length with the arch to get most stock motorcycles into the bed of lower pickups and trailers. However, note that the AF-9034-HD system is not long enough to load custom choppers with longer front forks or lowered motorcycles. Click the bike ramp pictures below to enlarge Features of the Motorcycle Bike Ramps:
Not sure what ramp length you need? Find out with the ramp calculator!
***DANGER! READ BELOW FOR DETAILS*** Note: Other companies are selling similar motorcycle bike ramps that are only using a 750 lb. weight capacity atv ramp for the center section and stating that it can hold 2100 lbs. This is extremely dangerous and could result in serious injury or death if you exceed the weight of the center ramp because the weight of the bike & it's rider will be distributed on to the center section alone. Loading with those ramps is unsafe even when all of the ramps are bolted together in the middle this is because by bolting them together you are not adding strength to the arch area which is the weakest area of this type of ramp. We have been in the ramp industry for over 8 years and are loading ramp experts. We have thoroughly tested this configuration in our facility and urge you to do your research before buying a motorcycle ramp because damage to your bike or serious injury is an expensive cost to pay if you have an accident with an inadequate ramp setup. |
|
||||||||||||||||||||||||||||||
AF-9034-HD Motorcycle Bike Ramp
- This bike ramp system is engineered to allow loading of you and your motorcycle or even an atv. When using a motorcycle bike ramp like the AF-9034-HD you are equipped with the ability to load your bike into the bed of a truck or a trailer. Simply setup the motorcycle ramps and drive or walk your bike up!
Only $29.99
