Plastic car ramps.

The new plastic low profile mini car ramps are designed for storage of your sports car or collector car and also designed for lifting low profile sports for getting access under the body for inserting a hydraulic jack or service lift. These plastic car ramp are the perfect solution for the automobile collector who stores his car over winter or for long periods of time. These ramps lift the tires about 3 inches off the ground to avoid contact with the concrete garage floor and have a series of hollow "honeycomb" channels to prevent moisture build up under the tires protecting them as well as lifting the under body farther from the damp garage floor. These plastic car ramps are sold in sets of 2 and also work great for those low profile cars that you need just a small amount of lift to get a hydraulic jack under the body or ground effects kits. These plastic ramps are the only solution for cars with expensive ground effects for getting a jack under the vehicle to lift it for an oil change or other undercarriage service. Whether you are working on you car in the garage or if you are a full blown auto service center, you will find these low cost plastic car ramps offer many uses for the automobile enthusiast or service center. If your looking for heavier duty version of the automotive drive on car ramp, a low profile car ramp, or other car ramp, then check out our complete line of car ramps.

Click the pictures of the plastic car ramps below to enlarge

Features of the Plastic Car Ramps:

• 4400 lb. weight capacity per set of 2
• Prevents moisture build up under cars for long storage
• Heavy duty plastic design
• Honeycomb design to prevent moisture build up
• fitted with tire stops
• lifts the front or rear of a car 2-3/4"
• Assists in getting a hydraulic jack under low profile vehicles or cars with ground effects
• Quicker than jacking up a vehicle, just drive on
• Car ramp dimensions - 27-1/2" long x 7-3/4" wide x 3" high
• Weigh only 4.5 lbs. per ramp

*Ramp Safety Warning & Usage Guidelines*

• Before using the ramps ensure other persons are clear of the vehicle and the ramps
• Ensure that the ramps are free from damage or corrosion before use.
• Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
• Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
• Carefully drive the vehicle onto the automotive ramps until it is in the correct position
• Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
• Before starting work, walk around the vehicle ensuring it is securely positioned
• Always use jack stand if a person will be going under the vehicle
• On completion of the work, check the parking brake is still firmly on and remove the chocks
• It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
• Exercise caution when using these car ramps with a trailer or three wheeled vehicle

Heavy Duty, Commercial, & Automotive Accessories

Model #	Description	Detailed Information	Price
4in-Rat-Flat Hook	4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit Weighs: 14lbs.	click to enlarge	+10 s&h
4in Rat-J-Hook	4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs.	click to enlarge	+10 s&h
18RAT-J-2	2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair)	click picture to enlarge	+8 s&h
18RAT-S-2	2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair)		+8 s&h
LOAD-BINDER	Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2"	click picture to enlarge	+12 s&h