Rack Ramps allow you to easily load your low-profile vehicle onto a service platform or lift without causing damage to the front end. Two different versions of this car ramp are available. The RR-RACK-4 has a notch cut out of it allowing it to be used with lifts that have built in ramps. When loading the built in ramp will rest on the notch space on the low profile ramp giving a gentler incline for the vehicle. The RR-RACK-5 is designed with a ledge that works well with four post lifts with removable ramps. The ledge of this ramp goes over the operating rods and cables running across the front of the steel beam of the lift. Both designs are constructed of a polystyrene material that is light weight and will not scratch the surface of your garage or other floor it is placed on. The Rack Ramps also have a textured surface to prevent the tires from slipping when loading your vehicle onto the platform. These ramps are made in the USA and come with a 1 year warranty.
If this is not the car ramp you are looking for, then check out our complete line of car ramps
Click the pictures below to enlarge
- Two models to choose from
- Textured surface prevents slipping
- Lightweight polystyrene material
- Will not scratch floor surface
- 1 Year Manufacturer Warranty
- Made in U.S.A.
Rack Ramps Specs & Pricing
| Model # |
Description |
Dimensions |
Ramp Loading Angle |
Weight |
Weight Capacity |
Picture |
Price |
| RR-RACK-4 |
Ramps for use with service platforms with built in ramps |
27.5" long x 14" wide x 4" tall |
9 degrees |
7.5 lbs each |
3,000 lbs per pair |
Click to Enlarge |
+22 s&h
|
| RR-RACK-5 |
Ramps for use with service platforms with removable ramps |
40" long x 14" wide x 5" tall |
8 degrees |
12.5 lbs each |
3,000 lbs per pair |
Click to Enlarge |
+26 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
Heavy Duty, Commercial, & Automotive Accessories
| Model # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
|
Items: ( ) | Total: 
