 New aluminum Tilt-a-Rack motorcycle carrier rack is a tilting carrier that eliminates the need for separate ramps. Three carrier sizes are available to fit most scooters, motocross bikes, small motorcycles or even a vespa. Simply deploy the attached rack extender ramp, tilt the rack to the ground and load. The weight of the motorcycle returns the carrier to the horizontal position and then simply slide the rack extender ramp back into the carrier's body, secure the motorcycle or scooter with straps and go! Each tilting motorcycle rack has a 1 Year Warranty. The 3 available racks come with 3 weight capacities to fit your motorcycle hauling needs. The 210 model has a 200 lb. weight capacity for smaller motocross bikes and scooters, the 410 model has a 400 lb. weight capacity for larger motocross bikes, vespa's and larger street scooters, and the 610 model has a 600 lb. capacity for larger off road motorcycles (requires a class IV or V receiver). We offer a complete line of accessories for the Tilt-a-Rack carrier including tie down packages, weatherproof motorcycle covers, silent hitch pins, height adjusters to adjust the carrier higher or lower and a bogie wheel kit that attaches to the rack and allows a single person to maneuver the cycle rack with ease. Click here to see all the optional motorcycle carrier rack accessories. Not Recommended for Honda Reflex or Helix Scooters!
Need a class III or IV hitch for the Tilt-a-Rack? Check out the Hitch Selector to find a trailer hitch for your vehicle!
NOT recommended for motor homes, RV's, or any tow-behind trailers including 5th wheel trailers & camping trailers due to excessive bouncing of the vehicle's suspension
Click the pictures below to enlarge
- All aluminum lightweight construction
- Locks level for safe transportation
- 1 Year Warranty
- Can be used on smaller sport vehicles
- Deck extender pulls out from under the carrier reducing the incline on taller vehicles
- The tilt feature eliminates the need for separate ramps
- 19" from pin hole to carrier - 210ACR, 410ACR & 610ACR
- Tilts on the passenger side for loading & unloading away from traffic
- Aluminum construction will never rust in the outdoor elements
- Requires a 2" frame mounted class lll or greater receiver hitch
- View Instructions (PDF)
- Carrier Carrying Capacity: Never exceed the maximum rated weight capacity of the wheelchair carrier
- Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Will not work with class II or smaller receivers
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out if your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailer
Find a trailer hitch for your vehicle with the Hitch Selector!
Lightweight aluminum tilt-a-rack models
| Model # |
Dimensions
(Useable) |
Rack Construction |
Trailer Hitch Required |
Weight Capacity |
Weight (total) |
Price
(FREE SHIPPING) |
| 210ACR |
60"x5"x2" |
Aluminum |
Class lll |
200 lbs** |
40 lbs. |
+FREE s&h
|
| 410ACR |
72"x6"x2" |
Aluminum |
Class lll |
400 lbs** |
47 lbs. |
+FREE s&h
|
| 610ACR |
84"x8"x2" |
Aluminum |
Class lV |
600 lbs** |
60 lbs. |
+FREE s&h
|
SHP-2030
Highly Recommended |
Silent Hitch Pin: For Class III & IV hitches - Keeps tow accessories secure and rattle free.
Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock |
Click to enlarge |
+free shipping
|
| HP31 |
Locking Hitch Pin - for 2" class III and IV receivers - 5/8" x 2-3/4"s |
Click to enlarge |
+ free shipping
|
| ANTI-TILT |
Anti-Tilt Locking Device: For Class III & IV hitches- Pinches main tube of rack tight into trailer hitch to eliminate rocking. Painted black.
Will not work on hitches with large chain loops! |
Click to enlarge |
+ free shipping
|
**NEVER exceed your vehicles carrying capacity or trailer hitch capacity. Most Class II hitches are typically rated at 350 lbs, Class III hitches are 500 lbs (Please refer to capacity sticker on the trailer hitch). Some vehicles may require air shocks or other modifications to the vehicles suspension. Please check your owners manual for vehicle hauling capabilities.
Click the links below to see our other available hitch carriers
Aluminum Motorcycle Carrier
The AMC-400, ultra light, all aluminum design can handle up to a 400 lb. bike.
Special Price-Only $129.99 |
Double Aluminum Dirt Bike Carrier
The AMC-600-2, ultra light, all aluminum design hauls 2 bikes with no Trailer!
Special Price-Only $239.99 |
Heavy Duty Sport Motorcycle Carrier
Lightweight Aluminum & Steel construction - Integrated Wheel Chock - Carries up to 600 lbs
Introductory Price - $259.99 |
View Our Other Discounted Motorcycle Products
|
Items: ( ) | Total: 
