Trailer-Mates are designed to add an additional 3" to low ground clearance vehicles, making access to the tie-down points easier when securing it to a transport trailer. Two different designs are available of these low profile transport trailer ramps, a front ramp model and a rear ramp model. The front ramp model has a concave depression that prevents the wheel from rolling when in transport and comes with an attached carry handle. The front and rear ramp models were constructed of lightweight, durable material that won't slide on your trailer and cause damage. Both trailer ramp models work with vehicle tires up to 12" wide and are sold in a set of 2. Trailer-Mates are made in the U.S.A. and come with a 1 year warranty. If this is not the vehicle ramp you are looking for, then check out our complete line of car ramps
Click the pictures of the Trailer-Mate Ramps below to enlarge
- Lightweight and durable
- Won't scratch your trailers surface
- Raises vehicle and extra 3"
- Front and Rear tire models available
- 1 Year Warranty
- Made in U.S.A.
Trailer-Mates Specs & Pricing
| Model # |
Description |
Dimensions |
Incline Degree |
Images |
Price |
| RR-TM-FRT |
Front Trailer-Mates - Designed for easier tie-down on a transport trailer (set of 2) |
36" long x 14" wide x 4.5" tall - 18 lbs combined |
10.79° |
|
+20 s&h
|
| RR-TM-REAR |
Rear Trailer-Mates - Designed for easier tie-down on a transport trailer (set of 2) |
32.75" long x 14" wide x 3" tall - 16 lbs combined |
10.79° |
|
+25 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
Heavy Duty, Commercial, & Automotive Accessories
| Model # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
|
Items: ( ) | Total: 
