Wheel Chocks - Rubber.

Prevent your car from rolling back causing serious injury by using these rubber wheel chocks by Race Ramps. These wheel chocks secure your vehicle with rubber tread and a solid bottom surface that works on other Race Ramps as well as smooth surfaces. The rubber wheel chocks measure 6" long by 4" high and 5" wide. Like other Race Ramp products, these rubber wheel chocks won't scuff your floor either. If this is not the car ramp you are looking for, then check out our complete line of car ramps

Click the picture below to enlarge

Features of the Wheel Chocks:

• Added security when working on your vehicle
• Sold in a set of (4) rubber wheel chocks
• Built rubber construction, these chocks will last long
• Dimensions are 6" long x 5" wide x 4" tall
• Lightweight polystyrene material weigh only 3 lbs. each
• 1 Year Manufacturer Warranty against defective materials
• Made in U.S.A.

*Ramp Safety Warning & Usage Guidelines*

• Before using the ramps ensure other persons are clear of the vehicle and the ramps
• Ensure that the ramps are free from damage or corrosion before use.
• Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
• Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
• Carefully drive the vehicle onto the automotive ramps until it is in the correct position
• Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
• Before starting work, walk around the vehicle ensuring it is securely positioned
• Always use jack stand if a person will be going under the vehicle
• On completion of the work, check the parking brake is still firmly on and remove the chocks
• It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
• Exercise caution when using these car ramps with a trailer or three wheeled vehicle