The Wheel Cribs by Race Ramp are designed to cradle the tires of your vehicle evenly allowing them to be a safer alternative to your traditional jack stands. Since the wheel cradles hold the wheels up it allows for unobstructed access to the underside of your vehicle. The wheel cribs comes in 3 different heights and can hold tire diameters of 25" to 30". These cradles hold up to 3,000 lbs per pair and are made of a lightweight polystyrene making them weigh under 10 lbs each. The 8" and 10" wheel crib models can be used with the 56" or 67" Car Ramps to make your vehicle level for tasks such as changing your oil. Every wheel crib has an attached strap for easier handling. Wheel Cribs are made in the U.S.A. and come with a 1 year warranty.
Click the pictures below to enlarge
- 3 heights to choose from
- Holds tires with 25" - 30" diameters
- lightweight
- Great for changing oil or displaying cars
- Attached carry handle
- 1 Year Warranty
- Made in U.S.A.
Wheel Cradle Specs & Pricing
| Model # |
Description |
Dimensions |
Weight Capacity |
Images |
Price |
| RR-WC-8 |
Wheel Crib - Holds tire 8" off the ground (set of 2) |
15" long x 12" wide x 87" tall - 10 lbs combined |
3,000 lbs/pair |
|
+24 s&h
|
| RR-WC-10 |
Wheel Crib - Holds tire 10" off the ground (set of 2) |
15" long x 12" wide x 10" tall - 10 lbs combined |
3,000 lbs/pair |
|
+24 s&h
|
| RR-WC-12 |
Wheel Crib - Holds tire 12" off the ground (set of 2) |
15.75" long x 12" wide x 12" tall - 15 lbs combined |
3,000 lbs/pair |
|
+25 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
Heavy Duty, Commercial, & Automotive Accessories
| Model # |
Description |
Detailed Information |
Price |
| 4in-Rat-Flat Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 14lbs. |
click to enlarge |
+10 s&h
|
| 4in Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb. Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs. |
click to enlarge |
+10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
click picture to enlarge |
+8 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
+8 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb. Capacity / 33,000 lb. Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2" |
click picture to enlarge |
+12 s&h
|
|
Items: ( ) | Total: 
