- Eliminate the barrier stairs can cause for persons with disabilities with a vertical platform lift! The lifts have a 600 lb. lifting capacity with 2 different lifting heights. The universal design of these wheelchair platform lifts allow for indoor and outdoor use and allows for entry from both sides of the lift! Features keyed, constant pressure controls with emergency stop for safety!
The Harmar Vertical Lift is your answer to residential accessibility. The lift is designed for use indoors and outdoors with weatherproof controls and switches. The premium line and value line each have 2 different models to choose from with varying lift heights of 53", and 72". The lift has a weight capacity of 600 lbs and features an integrated automatic folding ramp for easy access into the lift platform. The platform has dimensions of 34" x 54" and side wall the reach 36" high. Operating the lift is simple with keyed, constant pressure controls with an emergency stop for safety. The lift is powered by an AC motor with no belts which can wear down and fail. The lift is reversible for entry from either side for versatility. The wheelchair vertical platform lifts are easy to install and are virtually maintenance free! Includes a 1 year warranty!
** These platform lifts are not ADA Compliant**
Harmar Access recommends securing the lift using our PL010 Anchor Kit. If you purchase you own
floor anchors they must use 1/2-13 bolts and have a minimum tensile strength of 6000 LBS.
Vertical Lift Requirements:
The vertical platform lift has been designed to meet ASME A18.1 section 5 and CSA B44/ASME A17.5, with the
addition of certain options. Code requirements for Vertical Platform lifts vary depending on location.
It is the installers responsibility to contact their local code enforcement office and determine all of the
regulations they are subject to. You must do this before installing the Vertical Platform Lift.
The lift will require a 115 vac 20 amp grounded circuit.
Outdoor Installations will require a GFI protected circuit.
34" x 54" platform with non-skid traction surface
Only install the lift on a 4” thick , level 3,500 psi reinforced concrete slab.
Foot Print 48.75x70 in (this includes the folding access ramp)
Vertical Lift Required Tools:
1/2" Hammer Drill
1/2" Masonry Drill Bit
Appliance Dolly
Hammer
Level
Measuring Tape
Socket Wrench Set
Shop Vacuum
Premium Line Wheelchair & Scooter Platform Lift Specifications
Weight Capacity
600 lbs.
Platform Dimensions
34" wide X 54 " long
Side Wall Height
36" high
Maximum Wheelchair/Scooter Width & Length
32" wide X 52" long
Vertical Lift Warranty
1 Year
Return Policy
Lifts are custom built - 20% restocking fee + actual freight applies for all returns
Items: ( ) | Total: 
